落球回弹试验仪,介电击穿强度测定仪

ASTMD495耐高压低电流电弧放电试验机

ASTMD495耐高压低电流电弧放电试验机

日期:2025-11-16 03:15
浏览次数:2194
摘要:
ASTMD495耐高压低电流电弧放电试验机

高电压降小电流值检测仪(耐电孤检测仪)-(计算方式机抑制)

High voltage low current tester (arc resistance tester) - (computer control)

产品设备称呼:耐电弧试验机

Product name: electric arc resistance tester

好产品产品规格:NDH-A

Product model: NDH - A

需求细则:GB/T 1411-2002《固态绝缘性的材料耐高放低直流电压脉冲释放电能的冲击试验》(符合IEC  61621-1997)及ASTM D495等标准规范的规范要求设计构思制造出的,并符合国家IEC 149、UL 746A等试验台技巧

Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc

一 概述

一An overview of the

一般适合位置及基本功能:

本校正机是假设按照操作于伺服电机、电子产品开关和家庭支出电子产品开关等制造业的焊工用塑胶片、光敏环氧树脂胶和电接地漆等电接地素材的耐电弧放电焊接特性评判,主在液态电接地素材如:塑胶片、透气膜、光敏环氧树脂、云母片、陶瓷图片、玻璃钢、电接地油、电接地漆、瓦楞纸板等物料的耐电弧放电焊接特性测式;

本疲劳压力试验机由估算机把控加载,能够呈现某些检测状态下及检测用时,检测完成后并导出某些检测数据分析,并可word打印.基准测试意见书。

Main scope of application and features:

This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;

This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report 

二 功能特点

1 机器为内外合一成分,下端为操控机系统,顶部为实验设计箱。

2 本服务主要采用*新智力把控的技术,使用挑选应用程序(IEC或ASTM)可自行通过做实验的时候,并在电子产品上显示信息耐压历程和可是。

3 **安全性能优良,抗不干扰特性强,检查gps精度提高。

二:Functional features:

1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.

2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.

3 good safety performance, strong anti-interference ability, high test precision. 

三 主要技术参数

1 焊弧通断时候粗差:值为 ±10ms

2 调压器存储量:2kVA

3 额定功率做实验的时候电流:12.5kV

4 耐压直流电压导致精度:±3%

5 电流量操纵精度等级:±10%  工作电流测定要求:1.5%

6 工业对试件压力差:(0.5±0.05)N

7 工业相关材料:钨棒

8 金属电极空距:(6.35±0.1)mm(IEC)

               (6.0±0.1)mm(ASTM)

9 在使用自然环境高温:(23±2)℃

10 动用环境对空气相对湿度的:(50±5)%

11 开关电源:220V±5%  50Hz  10A

12 疲劳试验    方式:   新国标/美标/10 mA 不间断/20 mA 间隔/30 mA陆续/40 mA间隔

13 实验设计软件程序以下几点:

子程序段

脉冲电流值

mA

焊弧通断精力s

各软件程序段定期耗时s

实验总时间间隔s

 

 

IEC 61621

ASTM D495

 

 

1

10

1/8s通 7/8s断

1/4s通 7/4s断

60

60

2

10

1/4s通 3/4s断

1/4s通 3/4s断

60

120

3

10

1/4s通 1/4s断

1/4s通 1/4s断

60

180

4

10

连续性通

60

240

5

20

接连通

60

300

6

30

接连通

60

360

7

40

多次通

60

420

Three main technical parameters:

Error: 1 arc on-off time less than plus or minus 10 ms

Transformer capacity: 2 kva

3 test voltage rating: 12.5 kV

4: test voltage accuracy + / - 3%

5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%

6 electrode pressure on sample: (0.5 + 0.5) N

7 electrode materials: tungsten rods

8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)

9 using the environment temperature (23 + 2) ℃

10 use environment humidity: (50 + 5) %

Power supply: 220 v + 5% for 50 hz 10 a

Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous

13 test procedure is as follows:

Procedures section of the arc current

MA arc on-off time s the program s test total duration time s

IEC 61621 ASTM D495

1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s

2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s

3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s

4 consecutive 10 to 60, 240

5 20 consecutive 60, 300

30 consecutive 6 to 60, 360

7 consecutive 40 to 60, 420 

四  配置

号码

命名

用量

提示

01

耐焊弧试验仪

买台

 

02

探针装置

一项

 

03

电极片支架

几套

 

04

电源模块电缆线

这套

 

05

保护接地放**

一支队伍

 

06

瞬时电流毫安表

一套

 

07

我的电脑测控手机软件

1套

 

08

制样架

一个

 

09

电极材料相应标准规定块

2块

 

10

方面的标准块

2块

 

11

陶瓷图片片

2片

 

12

喷墨复印机机

1台

茶叶品牌

13

运算机

1台

名牌

14

安全使用描述书

1份

 

15

不资格证

1份

 

 

Four configuration:

Serial number name number note

01 arc resistance tester

02 a electrode system

03 electrode bearing a set

04 a set of power cable

05 ground put a rod

06 milliammeter current one

7 a set of computer measurement and control software

08 specimen holder a

09 electrode distance standard 2 blocks

Standard 2 blocks of 10 Angle

11 ceramic pieces 2 pieces

12 one brand inkjet printer

13 1 computer brand

14 1 instruction manual

15 1 certificate

五 產品材质:

NDH-A    耐脉冲应力测试仪-微机保持

NDH-B    耐电弧放电可靠性试验仪-触模屏控住

Five product model:

NDH - A arc resistance tester - microcomputer control

NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!

落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪 落球回弹试验仪,介电击穿强度测定仪